IVALITY HoleFix – Easily Seal Drill Holes in the Bumper

Have you removed your old license plate holder, leaving unsightly drill holes in the bumper? With the IVALITY HoleFix Kit, you can quickly, neatly, and virtually invisibly fill old license plate holes up to 10 mm in diameter—without any time-consuming filling, painting, or a trip to the body shop.

The set combines Sugru modeling compound for filling the drill holes with paint-matching adhesive pads that are then applied over the filled holes. This creates a clean and unobtrusive surface that’s ideal for switching to frameless or magnetic license plate holders.

The Easy Solution for Old License Plate Holes

After removing a conventional license plate holder, many vehicles are left with two or four visible drill holes in the front bumper. These holes detract from the clean look, especially when using frameless or magnetic license plate holders.

With HoleFix, you can fill in the license plate holes yourself:

1. Deburr the drill holes and clean the surface.

2. Press the Sugru modeling compound into the existing holes.

3. Smooth out the surface using the plastic putty knife provided.

4. Let the Sugru cure completely.

5. Place a matching 10-mm vinyl sticker in the center over the filled drill hole.

All done—no painting required and no complicated repairs.

Your Benefits with IVALITY HoleFix

• Easily fill in drill holes: Ideal for old license plate holes in the bumper.

• A Clean Vehicle Front: Perfect after switching to frameless or magnetic license plate holders.

• No painting required: No expensive paint repairs are necessary.

• With Sugru filler: For clean and permanent sealing of holes.

• Matching paint-matching adhesive pads: The round paint-matching stickers cover up the former drill hole.

• Easy DIY installation: Can be done yourself without any special tools.

• Suitable for many vehicles: Ideal for car bumpers and standard license plate mounting holes.

• Discreet result: The small paint pads are barely noticeable from a normal viewing distance.

Perfect for frameless license plate holders

HoleFix was developed specifically for drivers who want to remove their traditional license plate frames and switch to a sleek license plate mounting system.

Especially when used in combination with our IVALITY magnetic license plate holders or other frameless license plate holders, HoleFix ensures that the old mounting holes no longer detract from the appearance of your vehicle's front end.

What's Included

Depending on the option you select, you'll receive:

• 4 matching 10mm paint adhesive pads / paint stickers

• 1 package of Sugru modeling compound for filling the drill holes

• 1 plastic putty knife for smoothing the surface

• Installation Instructions

Application

Step 1: Carefully deburr old drill holes using a utility knife or a countersink.

Step 2: Thoroughly clean the surface and remove all dirt, grease, and dust.

Step 3: Press Sugru modeling compound into the drill holes.

Step 4: Use the plastic putty knife to smooth the surface as evenly as possible.

Step 5: Allow Sugru to cure completely for at least 24 hours.

Step 6: Stick the appropriate vinyl sticker in the center of the filled drill hole.

What kinds of holes is HoleFix suitable for?

HoleFix is particularly well-suited for typical drill holes caused by:

• License plate holder

• License plate holder

• Car Dealership License Plate Frames

• License Plate Documents

• previous screw fasteners

that occurred on the bumper.

A Clean Alternative to Paint Repairs

A professional repair—including filling, sanding, and painting—can easily cost several hundred euros. HoleFix offers a hassle-free alternative for anyone who wants to neatly fill holes in their bumper without having the entire bumper repainted.

Perfect for tuning enthusiasts, car lovers, and anyone who values a clean front end.

Frequently Asked Questions

Can I just cover the drill holes with the vinyl stickers?
For the cleanest possible result, we recommend filling any deep drill holes beforehand with the included Sugru modeling compound. This creates a smooth surface, allowing the vinyl decal to be applied neatly.

How long does Sugru take to cure?
We recommend allowing at least 24 hours for the paint to cure before applying the decal.

Are the vinyl decals visible?
The paint-matching adhesive pads are intentionally kept very small and color-matched to the vehicle's paint. Depending on the color, the condition of the paint, and the viewing angle, slight color differences may be visible.

Can I install HoleFix myself?
Yes. The set was designed specifically for easy use without any special tools.

Is HoleFix only suitable for license plate holes?
The primary application is for old drill holes from license plate holders. Depending on their size and location, similar small holes can also be concealed.

IVALITY HoleFix – Fill in old license plate holes and enjoy a clean vehicle front.

Ideal for anyone who wants to fill the drill holes in their bumper, remove old license plate holes, and then switch to a frameless license plate holder.

In Deutschland kannst du ab 39€ kostenfrei bestellen.
Innerhalb der Eu bieten wir kostenfreien Versand ab 79 € an.
Ansonsten kostet der Versand 4,95 €.

Wenn dir unsere Produkte doch nicht gefallen, kannst du diese innerhalb von 30 Tagen zurücksenden!